Shop

Showing 81–85 of 120 results

• Manually Operated Turntable

  

  The manually operated turntable can be placed in-line with gravity or powered conveyors. The operator can manually reposition the turntable to divert pallets, product, etc. to an adjacent conveyor line.

  • Rollers: 1.9"dia or 2"dia spaced on 3" centers.
  • Widths (between rail):
  • 3 foot section: 19" to 27".
  • 4 foot section: 31" to 39".
  • Handle: spring loaded to position and lock table at 90º intervals.
  • Capacity: 2000 lbs.
  • Elevation (top of rollers): 8-1/2" minimum, 40" maximum.
  • Floor supports available.

• Mattop Conveyor

  

  Featuring a modular plastic belt for both straight and curves, this design is ideally suited for cooling, drying or accumulation of products.

  • Mild steel or sanitary stainless steel frames.
  • FDA approved belting.
  • Optional hinged lower catch pans for dust particle collection.
  • Optional steel or Lexan top covers to reduce product contamination.
  • Full wash-down capability, with stainless steel option.

• Model “C” – Cleated Incline (Hytrol – Incline Belt Conveyor, Cleated)

  

  The model C handles bags, boxes, cartons, and parts. It may be set at any angle from horizontal to 45º for various uses, including floor-to-floor conveying and the transportation of materials from building to truck or box car. Shown with optional floor supports.

  • Bed: 6-5/8" deep x 12 ga. formed bed, powder painted. Standard sections come in lengths of 6', 8', & 10'.
  • Belt: hardwood cleats spaced every 60". Conveyor can be supplied less cleats.
  • Belt widths: 14", 18", 24", & 30".
  • Motor: energy efficient motor with brake.
  • Adjustable floor supports available.
  • Capacity: up to 520 lbs.
  • Reversible.

• Model “RBI” – Floor to Floor Roller Bed (Hytrol – Incline Belt Conveyor, Roller Bed)

  

  The model RBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline to horizontal plane. Inclines are easily adjusted up to 30º. This conveyor can also be used as a booster conveyor in gravity flow systems. Shown with optional floor supports.

  • Bed: 6-1/2" deep x 12 ga. formed steel frame, powder painted. Standard sections come in lengths of 6', 8', & 10'.
  • Belt widths: 10", 12", 14", 16", 18", 20", 22", 24", 28", 30", 34", & 36".
  • Center drive (standard).
  • Motor: 1 HP C-Face "SSB" series brake motor, 2 HP max.
  • Adjustable floor supports available.
  • Capacity: 225 lbs. per linear foot max.
  • Reversible.
  • 24-hour stockyard availability (contact for sizes available).

• Model “SBI” – Floor to Floor Slider Bed (Hytrol – Incline Belt Conveyor, Slider Bed)

  

  The model SBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline to horizontal plane. Inclines are easily adjusted up to 30º. This conveyor can also be used as a booster conveyor in gravity flow systems. Shown with optional floor supports.

  • Bed: 6-1/2" deep x 12 ga. formed steel frame, powder painted. Standard sections come in lengths of 6', 8', & 10'.
  • Belt widths: 10", 12", 14", 16", 18", 20", 22", 24", 28", 30", 34", & 36".
  • Center drive (standard).
  • Motor: 1 HP C-Face "SSB" series brake motor, 2 HP max.
  • Adjustable floor supports available.
  • Capacity: 100 lbs. per linear foot.
  • Reversible.
  • 24-hour stockyard availability (contact for sizes available).