Shop

Showing 51–55 of 120 results

• Hytrol – Model ABEZ Medium Duty

  

  The model ABEZ is a horizontal live roller (flat belt driven) conveyor designed for applications that require accumulation of products without a build-up of line pressure. Singulation feature allows products to be easily removed from any location on conveyor.

  • Bed: 6-1/2" x 12ga formed steel, powder painted.
  • Rollers: 1.9"dia x 16ga galvanized rollers.
  • EZLogic accumulation module located in each zone.
  • Widths (overall): 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", & 42".
  • Motor: 1/2 HP standard, 2 HP max.
  • Center drive standard.
  • Capacity (max load per linear foot): 150 lbs, no minimum load.
  • Adjustable floor supports available.
  • Accumulation zones: 12", 18", 24", 30", & 36" long air controlled.
  • Stockyard availability (contact for sizes available).

• Hytrol – Model “CRB” Troughed Roller Bed Belt Conveyor

  

  The model CRB is ideally used in scrap handling and recycling operations. The roller bed with deep troughed construction can carry culled or broken glass, cans, wood chips, aluminum, steel, plastic stampings, etc. The CRB is widely used in recycling operations as an environmental conveyor. Shown with optional floor supports.

  • Bed: roller bed with rollers mounted in 10 ga. painted formed steel channel frame with 12 ga. painted side guards extending 8-1/2" above the belt. Sections bolt together with splice plates.
  • Rollers: 2" dia. x 12 ga. unplated tread rollers spaced every 6", or 12".
  • Overall frame widths: 16", 18", 20", 22", 24", 28", & 34".
  • End drive (standard).
  • Motor: 1 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity: maximum load per linear foot of conveyor is 25 lbs., not to exceed rated capacities.

• Hytrol – Model “Gapper” Slider Bed Belt Conveyor

  

  The model Gapper is designed for feeding saw tooth merges, combiners, sorters, or other equipment where gaps must be pulled between cartons. Shown with optional floor supports.

  The model Gapper-L has GapLogix controls and a 5 HP gearmotor. It has the added advantage of being able to feed scales where carton pitch must be controlled.

  • Bed: 12 ga. galvanized slider pan mounted in 6-1/2" x 12 ga. powder painted formed steel channel frame.
  • Belt widths: 12", 18", 24", 30", & 36".
  • Center drive (standard).
  • Motor: 1 HP standard, 3 HP max.
  • Adjustable floor supports available.
  • 6 speed gap ratios.

• Hytrol – O-Ring Transfer, BR Type

  

  O-Ring Transfers and Reversing O-Ring Transfers are used to move products at right angles to adjacent or parallel conveyor lines. An air bag actuator lifts the transfer mechanism while powered O-rings transfer the product. Linear bearings are used to guide the transfer module as it is raised and lowered. Can be used with models 138 and 190 NSP/NSPEZ line shaft conveyors.

  • Transfer flow: standard, opposite direction, or reversing.
  • Widths (overall):
  • 138-NSP: 15", 18", & 24".
  • 190-NSP: 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", & 42".
  • Mounting:
  • Single direction: 36" long section of 138-NSP/NSPEZ, 190-NSP/NSPEZ.
  • Reversing: 48" long section of 138-NSP/NSPEZ, 190-NSP/NSPEZ.
  • Drive:
  • Single direction: driven from line shaft of conveyor. Max 4 transfers per drive.
  • Reversing: 1/2 HP shaft-mounted gearmotor with variable speed controller.
  • O-ring: 3/8"dia polyurethane.
  • Speed: not to exceed speed of conveyor.
  • Capacity: 75 lbs max unit load.
  • No accumulation in transfer section.
  • 1/4 HP per transfer must be included in conveyor HP requirement.

• Hytrol – Pivot Diverters

  
  • Single Powered Pivot Diverter.
  • Double Powered Pivot Diverter.