Related products

• Hytrol – Model “PSB” Plastic Belt Conveyor

  
  The model PSB with modular plastic belting uses a positive drive system to eliminate belt slippage and mistracking. Shown with optional floor supports. PSBC Plastic Belt Curve is also available. Belt widths: 12", 18",& 24". Capacity: 300 lbs. distributed live load.

  • Bed: UHMW on aluminum slider bars, mounted to frame spacers. Mounted in 7-1/2" x 12 ga. powder painted, formed steel channel frame bolted together with butt couplings.
  • Polypropylene 2" pitch plastic belt.
  • Standard belt widths: 8", 10", 12", 14", 16", 18", 20", 22", 24", 26", 28", 30", 32", 34", 36", & 38".
  • Motor: 1/2 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity: up to 200 lbs. per linear foot.

• Hytrol-Model “CCEZ” Case Conveyor (Air)

  

  The model CCEZ is a horizontal plastic belt conveyor designed for accumulating 12 & 24 packs of canned beverages where high speeds and large through-puts are required. Shown with optional floor supports.

  • Bed: 13" deep x 1-1/2" flange x 12 ga. formed, powder painted steel frame.
  • Belt: 6" wide x 1/2" thick low friction plastic belt (4-1/2" wide available).
  • Motor: 1 HP 230/460/3 EE with AC variable speed controller.
  • Adjustable floor supports available.
  • Accumulation zones: 24" long air controlled.
  • EZLogic accumulation module located in each zone.

• Hytrol – Model “PLEZD” Heavy Duty Plastic Belt Accumulating (EZLogic)

  
  The model PLEZD is a plastic belt conveyor designed to handle footed pallets, slip sheets, unitized loads - items normally non-conveyable on roller conveyor. The PLEZD provides zero back pressure accumulation, reducing the possibility of product damage. Shown with optional floor supports.

  • Bed: 1/4" UHMW over steel bed channels mounted in 7-1/2" x 7ga. powder painted formed steel channels.
  • Frame widths: 34", 36", 38", 40", 42", 44", 46", 48", 50", 52", 54", 64", & 76".
  • Belt: 1" pitch polypropylene plastic.
  • Motor: 1/2 HP gearmotor at discharge of each zone.
  • Floor supports available.
  • Capacity: up to 2000 lbs.
  • EZDrive System (individual zone drive).
  • EZLogic accumulation system (retro-reflective).

• Model “C” – Cleated Incline (Hytrol – Incline Belt Conveyor, Cleated)

  

  The model C handles bags, boxes, cartons, and parts. It may be set at any angle from horizontal to 45º for various uses, including floor-to-floor conveying and the transportation of materials from building to truck or box car. Shown with optional floor supports.

  • Bed: 6-5/8" deep x 12 ga. formed bed, powder painted. Standard sections come in lengths of 6', 8', & 10'.
  • Belt: hardwood cleats spaced every 60". Conveyor can be supplied less cleats.
  • Belt widths: 14", 18", 24", & 30".
  • Motor: energy efficient motor with brake.
  • Adjustable floor supports available.
  • Capacity: up to 520 lbs.
  • Reversible.