Showing 1–5 of 7 results

  • Hytrol – Model “A” Aluminum Portable Narrow Belt

    The model A, with its Roughtop belt, easily moves boxes, cases, and cartons up inclines. Its narrow width allows it to be used in a stairway for floor-to-floor conveying. It can be propped on a shelf for stacking or order picking. The Model A can be stored on its end in a minimum amount of space.

    • Bed: 12" wide x 0.080 aluminum, 6061-T6 heat treated, reinforced.
    • Belt width: 10".
    • Belt speed: 83 FPM.
    • Overall lengths: 6', 8', 10', 12', 14', 16', 18', & 20'.
    • Motor: 1/2 HP standard.
    • Capacity: 200 lbs total distributed load, 120 lbs unit load.
    • Reversible.
    • Switch: reversing drum with power cord and plug mounted on side of unit.
    • Speed reduction: accomplished by 4-step jack shaft, v-belt, and #40 roller chain.
    • Ajustable floor supports.
    • 1 week stockyard availability (contact for sizes available).
    • Options include: rubber casters, floor stands, upper and lower feeders, trough attachment, cover, etc.

  • Hytrol – Model “B” & “BL” Portable Folding Cleated

    Both models B and BL are ideal for stacking, loading, and unloading. Hardwood cleats permit use at steeper inclines up to 45º. The conveyor folds onto its own portable base for storage.

    Because of the extra length, the BL can be used to convey material from one floor to another or to a mezzanine. Its long bed can also extend far into a truck, thereby minimizing the distance for loading or unloading the conveyor.

    • Bed: 4" deep x 20" wide x 12ga formed steel bed, hinged.
    • Lengths:
    • B: 10', 12', 14', & 16'.
    • BL: 20' & 22'.
    • Belt width: 14" wide black roughtop.
    • Belt cleats: two 1-1/2"dia x 1" high hardwood cleats every 60".
    • Belt speed: 65 FPM.
    • Motor: 1 HP.
    • Capacity: 300 lbs total distributed load, 150 lbs unit load.
    • Reversible.
    • Switch: reversing drum with 20' power cord and plug.
    • Self-powered raising device.
    • 1 week stockyard availability (contact for sizes available).
    • Options include: rubber casters, floor locks, upper and lower feeders, trough attachment, remote switch control, etc.

  • Hytrol – Model “BA” Portable Folding Booster Belt

    The model BA is ideal for stacking, loading, and unloading. One lever control adjusts angle without effort. Desired angle automatically locked by power screw.

    • Bed: 4" deep x 20" wide x 12ga formed steel bed, hinged.
    • Lengths: 10', 12', 14', 16', 20', & 22'.
    • Belt width: 14".
    • Belt speed: 65 FPM.
    • Motor: 1 HP.
    • Capacity: 300 lbs total distributed load, 150 lbs unit load.
    • Reversible.
    • Switch: reversing drum with 20' power cord and plug.
    • Self-powered raising device.
    • 1 week stockyard availability (contact for sizes available).
    • Options include: rubber casters, floor locks, upper and lower feeders, trough attachment, remote switch control, etc.

  • Hytrol – Model “PC” Portable Parts Conveyor

    The model PC can be used as a portable or permanent parts conveyor. Side guards and cleated belt easily catch small stampings, plastic parts, etc., and carry them to hoppers or drums. Flapper guard prevents parts from falling through conveyor.

    Portable base support is tubular steel mounted on 4"dia steel wheels. Adjustable to control conveyor height at top and bottom. Adjustable floor supports available on longer units.

    • Bed: 6-5/8" deep x 12ga formed steel bed with 3-1/2" high vertical guards.
    • Lengths: 5', 7', 9', 11', & 13'.
    • Belt: 1-1/2" high molded cleats on 12" centers.
    • Belt widths: 4", 6", 8", 10", 12", 16", 18", & 24".
    • Belt speed: 65 FPM.
    • Overhead end drive.
    • Motor: 1/2 HP, 2 HP max.
    • Capacity: 300 lbs total distributed load.
    • 24-hour stockyard availability (contact for sizes available).
    • Options include: wire mesh belt, underside end drive, lower feeder, etc.

  • Hytrol – Model “PCA” Light Duty Portable Parts

    The model PCH parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to Z type units.

    • Bed: 8-5/8" deep x 10ga powder painted formed steel channel.
    • Incline: 45º standard; 30º and 60º available.
    • Belt: 12ga metal piano hinge.
    • Belt speed: 30 FPM.
    • Overhead drive.
    • Overall widths: 10-3/8", 12-3/8", 16-3/8", 22-3/8", & 28-3/8".
    • Motor: 1 HP standard, 2 HP max.
    • Adjustable floor supports available.
    • Capacity: 35 lbs per linear foot.
    • Optional: belt style and speed, drip pans, cover, electrical controls, etc.