General Conveyor Co. Ltd. - Products - Conveyors, Related Equipment, Turntables

Note: Some guards or components may have been temporarily removed for illustrative purposes only. All equipment guards, protective devices and safety components shall be in place correctly before operating the machine.

Unique torque arm for smooth 90º turning motion.
Powered chain driven live roller conveyor included.
Two drive motors.
Up to 4000 pound capacity.
Can be fully integrated with existing pallet handling conveyors.

General Conveyor offers a wide range of pallet handling equipment including rotary turntables, pallet handling conveyors, palletizers and depalletizers.

Accumulates product for automated machinery.
Easily incorporated into existing conveyor systems.
Used as a product collecting station for manual packing.
Maintenance free.

General Conveyor Co. Ltd. designs and manufactures a variety of rotary accumulator/unscrambler systems. These rotary accumulators are suitably situated on conveyor lines in front of automated machinery where products accumulate or at the end of packaging lines.

With the addition of an optional sweep arm, manual unloading of products into the main conveyor stream is possible. These rotary accumulators are available with a variety of powered infeeds with fixed or tilting dump tables. All designs are available in various sizes and in stainless steel construction.

26-CRPT Power Rotated Turntable

Motor:
Turntable: 1 HP gearmotor.
Conveyor: 1/2 HP gearmotor.
Rollers:
Tread: 2-5/8"dia x 7ga wall on 4" roller centers.
Drive: 2-5/8"dia x .219 wall with heavy duty bearings.
Speed:
Turntable: 3 revolutions per minute.
Conveyor: 30 FPM.
Elevation: 16" minimum.
Capacity: 4000 lbs max load.
Optional: gravity transition rollers.
Optional: external transition roller sections (mounted to mating conveyors to fill in gap created by radius of turntable).

The 26-CRPT is used to rotate products up to 360 degrees. It is comprised of a turntable, and a 26-CRR conveyor section with a side mounted drive contained within the turning radius of the turntable.

The turntable is powered by a shaft mounted gearmotor complete with variable speed controller for soft start/stop and has proximity switches mounted on the base to sense position and control rotation of product. An 8-wire collector ring allows unlimited rotation of turntable. Powered transition rollers, mounted on the apron of the turntable deck, help move product on and off.

Manually Operated Turntable

Rollers: 1.9"dia or 2"dia spaced on 3" centers.
Widths (between rail):
3 foot section: 19" to 27".
4 foot section: 31" to 39".
Handle: spring loaded to position and lock table at 90º intervals.
Capacity: 2000 lbs.
Elevation (top of rollers): 8-1/2" minimum, 40" maximum.
Floor supports available.

The manually operated turntable can be placed in-line with gravity or powered conveyors. The operator can manually reposition the turntable to divert pallets, product, etc. to an adjacent conveyor line.

Powered Turntable

Chain-driven free-floating drive wheel.
Motor: 1-1/2 HP.
Capacity: 500 lbs total distributed load; 150 lbs max unit load.
Elevation (top of table): 28" to 40" adjustable.
Floor supports available.

The powered turntable is used when two parallel conveyor lines must be close together with a 180 degree turn at one (or both) ends. The turning radius is held to a minimum, less than would be available with gravity or powered curve sections. Turntable plow and guard rails insure product safety while negotiating 180 degree turns. The unit is reversible and all bearings are sealed. The table top speed at the drive wheel is 190 FPM.