Note: Some guards or components may have been temporarily removed for illustrative purposes only. All equipment guards, protective devices and safety components shall be in place correctly before operating the machine.


 

 

Portable Conveyors

Moveable, versatile, temporary conveying. Also see Gravity Conveyors for more portable solutions.

Brochure


Model "A" Aluminum Portable Narrow Belt
Hytrol - A Aluminum Portable Narrow Belt
  • Bed: 12" wide x 0.080 aluminum, 6061-T6 heat treated, reinforced.
  • Belt width: 10".
  • Belt speed: 83 FPM.
  • Overall lengths: 6', 8', 10', 12', 14', 16', 18', & 20'.
  • Motor: 1/2 HP standard.
  • Capacity: 200 lbs total distributed load, 120 lbs unit load.
  • Reversible.
  • Switch: reversing drum with power cord and plug mounted on side of unit.
  • Speed reduction: accomplished by 4-step jack shaft, v-belt, and #40 roller chain.
  • Ajustable floor supports.
  • 1 week stockyard availability (contact for sizes available).
  • Options include: rubber casters, floor stands, upper and lower feeders, trough attachment, cover, etc.

The model A, with its Roughtop belt, easily moves boxes, cases, and cartons up inclines. Its narrow width allows it to be used in a stairway for floor-to-floor conveying. It can be propped on a shelf for stacking or order picking. The Model A can be stored on its end in a minimum amount of space.



Model "R" Aluminum Portable Folding Belt
Hytrol - R Aluminum Portable Folding Belt
  • Bed: 18" wide x 0.080 aluminum bed, 6061-T6 heat treated, reinforced.
  • Belt width: 12".
  • Belt speed: 65 FPM.
  • Overall lengths: 10', 11-1/2', 13', 15', 17', 19', & 21'.
  • Motor: 1/2 to 3/4 HP.
  • Capacity: 300 lbs total distributed load, 150 lbs unit load.
  • Reversible.
  • Switch: reversing drum with power cord and plug mounted on side of unit.
  • Speed reduction: accomplished by 4-step jack shaft, v-belt, and #40 roller chain.
  • Adjustable floor supports.
  • 1 week stockyard availability (contact for sizes available).
  • Options include: rubber casters, floor stands, upper and lower feeders, trough attachment, cover, etc.

The model R besides being extremely convenient (can be folded in half), is also very versatile. Examples of conveying uses include: truck, loft, or freight car, floor-to-floor, stairway, and as a portable booster with a wheel or roller conveyor. It is also suitable for bag handling, bag and carton stacking and moving cartons, cases, and boxes.



Model "B" & "BL" Portable Folding Cleated
Hytrol - B, BL Portable Folding Cleated
  • Bed: 4" deep x 20" wide x 12ga formed steel bed, hinged.
  • Lengths:
       B:   10', 12', 14', & 16'.
       BL:   20' & 22'.
  • Belt width: 14" wide black roughtop.
  • Belt cleats: two 1-1/2"dia x 1" high hardwood cleats every 60".
  • Belt speed: 65 FPM.
  • Motor: 1 HP.
  • Capacity: 300 lbs total distributed load, 150 lbs unit load.
  • Reversible.
  • Switch: reversing drum with 20' power cord and plug.
  • Self-powered raising device.
  • 1 week stockyard availability (contact for sizes available).
  • Options include: rubber casters, floor locks, upper and lower feeders, trough attachment, remote switch control, etc.

Both models B and BL are ideal for stacking, loading, and unloading. Hardwood cleats permit use at steeper inclines up to 45. The conveyor folds onto its own portable base for storage.

Because of the extra length, the BL can be used to convey material from one floor to another or to a mezzanine. Its long bed can also extend far into a truck, thereby minimizing the distance for loading or unloading the conveyor.



Model "BA" Portable Folding Booster Belt
Hytrol - BA Portable Folding Booster Belt
  • Bed: 4" deep x 20" wide x 12ga formed steel bed, hinged.
  • Lengths: 10', 12', 14', 16', 20', & 22'.
  • Belt width: 14".
  • Belt speed: 65 FPM.
  • Motor: 1 HP.
  • Capacity: 300 lbs total distributed load, 150 lbs unit load.
  • Reversible.
  • Switch: reversing drum with 20' power cord and plug.
  • Self-powered raising device.
  • 1 week stockyard availability (contact for sizes available).
  • Options include: rubber casters, floor locks, upper and lower feeders, trough attachment, remote switch control, etc.

The model BA is ideal for stacking, loading, and unloading. One lever control adjusts angle without effort. Desired angle automatically locked by power screw.



Model "PC" Portable Parts Conveyor
Hytrol - PC Portable Parts Conveyor
  • Bed: 6-5/8" deep x 12ga formed steel bed with 3-1/2" high vertical guards.
  • Lengths: 5', 7', 9', 11', & 13'.
  • Belt: 1-1/2" high molded cleats on 12" centers.
  • Belt widths: 4", 6", 8", 10", 12", 16", 18", & 24".
  • Belt speed: 65 FPM.
  • Overhead end drive.
  • Motor: 1/2 HP, 2 HP max.
  • Capacity: 300 lbs total distributed load.
  • 24-hour stockyard availability (contact for sizes available).
  • Options include: wire mesh belt, underside end drive, lower feeder, etc.

The model PC can be used as a portable or permanent parts conveyor. Side guards and cleated belt easily catch small stampings, plastic parts, etc., and carry them to hoppers or drums. Flapper guard prevents parts from falling through conveyor.

Portable base support is tubular steel mounted on 4"dia steel wheels. Adjustable to control conveyor height at top and bottom. Adjustable floor supports available on longer units.



Model "PCA" Light Duty Portable Parts
Hytrol - PCA Light Duty Portable Parts
  • Bed: 12ga formed steel troughed bed with 1" high vertical sides.
  • Lengths: 4', 5', 6', 8', & 10'.
  • Belt widths: 4", 6", 8", 10", 12", & 18".
  • Belt speed: 65 FPM.
  • Overhead drive.
  • Motor: 1/2 HP.
  • Adjustable floor supports available.
  • Capacity (max load per linear foot): 10 lbs.
  • Reversible.
  • Options include: alternate belt speed, underside drive, electrical controls, etc.

The portable model PCA conveyor is easily positioned in or under punch presses, injection molding machines, extruding equipment, and other machinery where small steel or aluminum stampings, plastic parts, etc. must be quickly conveyed to hoppers or drums to keep production on the move.



Model "PCH" Piano Hinge Parts
Hytrol - PCH Piano Hinge Parts
  • Bed: 8-5/8" deep x 10ga powder painted formed steel channel.
  • Incline: 45 standard; 30 and 60 available.
  • Belt: 12ga metal piano hinge.
  • Belt speed: 30 FPM.
  • Overhead drive.
  • Overall widths: 10-3/8", 12-3/8", 16-3/8", 22-3/8", & 28-3/8".
  • Motor: 1 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity: 35 lbs per linear foot.
  • Optional: belt style and speed, drip pans, cover, electrical controls, etc.

The model PCH parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to Z type units.



Model "PCX" Low Profile Portable Parts
Hytrol - PCX Low Profile Portable Parts
  • Bed: 7-1/4" deep x 12ga formed steel side channel with bolt-in slider bed, 1" high sides above the belt.
  • Incline: 36 standard; 45 available.
  • Belt: 1" high steel cleats on 12: centers.
  • Belt widths: 12", 18", & 24".
  • Belt speed: 25 FPM.
  • Underside drive.
  • Motor: 1/2 HP standard.
  • Capacity: 100 lbs total distributed load.
  • Belt scraper: mounted inside conveyor bed section to clean underside of return belt.
  • Portable base support: adjustable from 4" to 30".
  • Options include: floor supports, overhead end drive, v-belt drive, electrical controls, etc.

The portable model PCX parts conveyor can be easily positioned under punch presses and extruding machines to catch small steel, plastic, or aluminum stampings, etc. The PCX conveys them quickly up to a hopper or drum.