Note: Some guards or components may have been temporarily removed for illustrative purposes only.
All equipment guards, protective devices and safety components shall be in place correctly
before operating the machine.
- Plastic or steel clad chain for harsh environments, such as transporting metal components.
- Simple side transfers with a parallel configuration.
- Easy cleanout of the optional drip trays.
- Complete range of corners, stops and merges to allow complete system supply.
- Mild or stainless steel construction.
General Conveyor offers a single or a twin alpine accumulation system. Suitable for handling plastic, metal or glass containers.
- Can function as an elevator or lowerator.
- High speed or low speed.
- Motor driven lift.
- Powered chain driven live roller conveyor.
- Either a "C" or "Z"-shaped flow configuration.
- Can be customized to accomodate a variety of pallet sizes.
General Conveyor offers a wide range of pallet handling equipment including rotary turntables,
pallet handling conveyors, palletizers and depalletizers.
- Full wash-down capability.
- Mild or stainless steel construction.
- Low tension drive.
- Bulk material cooling/drying.
- Stainless steel, mild steel or plastic chain.
- Heavy construction for maximum life.
- FDA and Agriculture Canada approved plastic belts.
- Large open area for product cooling and conveying.
General Conveyor offers a wide range of specifically designed curing or cooling
towers for handling a variety of products. Suitable for use in the food or
pharmaceutical industries.
- Suitable for cases, totes, bottles, cans, trays, books etc.
- Mild steel or stainless steel construction.
- Variety of infeed/discharge configurations.
- Reversible models available.
- Standard belt widths of 7-1/2", 12", 15", 18" and 24".
- Ambient, cooling or high temperature applications.
- Optional: PLC with operator interface panel.
Designed as a cost effective alternative to a low-tension spiral, this conveyor features a simple
design with minimal parts. Because the drum is stationary, a special chain with a bearing mechanism
is used to reduce the tension.
C - Cleated Incline
- Bed: 6-5/8" deep x 12 ga. formed bed, powder painted. Standard sections come in lengths of 6', 8', & 10'.
- Belt: hardwood cleats spaced every 60". Conveyor can be supplied less cleats.
- Belt widths: 14", 18", 24", & 30".
- Motor: energy efficient motor with brake.
- Adjustable floor supports available.
- Capacity: up to 520 lbs.
- Reversible.
The model C handles bags, boxes, cartons, and parts. It may be set at any angle from horizontal to
45º for various uses, including floor-to-floor conveying and
the transportation of materials from building to truck or box car. Shown with optional floor supports.
RBI - Floor to Floor Roller Bed
- Bed: 6-1/2" deep x 12 ga. formed steel frame, powder painted. Standard sections come in lengths of 6', 8', & 10'.
- Belt widths: 10", 12", 14", 16", 18", 20", 22", 24", 28", 30", 34", & 36".
- Center drive (standard).
- Motor: 1 HP C-Face "SSB" series brake motor, 2 HP max.
- Adjustable floor supports available.
- Capacity: 225 lbs. per linear foot max.
- Reversible.
- 24-hour stockyard availability (contact for sizes available).
The model RBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over
at the discharge end to insure a smooth transfer from incline to horizontal plane. Inclines are easily
adjusted up to 30º. This conveyor can also be used as a booster
conveyor in gravity flow systems. Shown with optional floor supports.
SBI - Floor to Floor Slider Bed
- Bed: 6-1/2" deep x 12 ga. formed steel frame, powder painted. Standard sections come in lengths of 6', 8', & 10'.
- Belt widths: 10", 12", 14", 16", 18", 20", 22", 24", 28", 30", 34", & 36".
- Center drive (standard).
- Motor: 1 HP C-Face "SSB" series brake motor, 2 HP max.
- Adjustable floor supports available.
- Capacity: 100 lbs. per linear foot.
- Reversible.
- 24-hour stockyard availability (contact for sizes available).
The model SBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over
at the discharge end to insure a smooth transfer from incline to horizontal plane. Inclines are easily
adjusted up to 30º. This conveyor can also be used as a booster
conveyor in gravity flow systems. Shown with optional floor supports.